Answer Description

Ethernet over Power also called Power-line Communication allows Ethernet signals to be sent over standard electrical power wiring in a building. This is helpful for situations where both WiFi and running new Ethernet cabling is not supported. Usually this is done by using adapters that plug into a wall power outlet and have a RJ-45 socket. It is often confused with Power over Ethernet, which is using Ethernet signals to power a networking device.

Wikipedia

Power-line communication (also known as power-line carrier), abbreviated as PLC, carries data on a conductor that is also used simultaneously for AC electric power transmission or electric power distribution to consumers. A wide range of power-line communication technologies are needed for different applications, ranging from home automation to Internet access which is often called broadband over power lines (BPL). Most PLC technologies limit themselves to one type of wires (such as premises wiring within a single building), but some can cross between two levels (for example, both the distribution network and premises wiring). Typically transformers prevent propagating the signal, which requires multiple technologies to form very large networks. Various data rates and frequencies are used in different situations. A number of difficult technical problems are common between wireless and power-line communication, notably those of spread spectrum radio signals operating in a crowded environment. Radio interference, for example, has long been a concern of amateur radio groups.